ACCESSORIES
The Titan RS-500 motorcycle wheel stand is perfect for rotating your front or back tire without having to lift them off the ground. The low profile ramp allows for easy on and off access while the non-slip backing, sealed bearings and powder coated finish provide the solid construction that you expect from a Titan Lifts motorcycle accessory. This unit is great for chain maintenance and polishing or just for simply cleaning your tires. With a 500 lb. capacity, this roller stand can easily assist you with most motorcycles.
Simply set this funnel over the standard round funnel on your Titan POD-8 or POD-18 to give you a larger catch area for your vehicle fluids.
Features
- Compatible with Titan POD-8 and POD-18 oil drains
- Provides a larger catch area for vehicle fluids
- Made of thick, durable plastic
Dimensions
| Length | 24" |
|---|---|
| Width | 23" |
This adapter fits the following models: HD2P-1000AC-D HD2P-9000AC (Gen 1) HD2P-9000AF (Gen 1)
The padded frame engaging adapter will allow you to lift trucks and other vehicles with harder to access frame lifting points.
SOLD INDIVIDUALLY
Specs:
Adapter contact area: 3-5/8”
Rubber pad: 3-1/8” square
Peg diameter: 1-3/8”
150mm Master/Premier Series Truck Adapters - only compatible with Master/Premier Series 2-post lifts
SOLD INDIVIDUALLY
The steel EZ-Mover Caddy, once assembled, will accommodate up to 4 of the Titan EZM-1500 movers. With its (4) heavy-duty polyurethane swivel casters, moving your EZM around your shop and out of the way, is a breeze.
These diamond plated extensions are 12" wide by 87 1/2" long and are designed to fit onto the Titan 1000D lift tables. Equipped with removable ramps and a stabilizer bar, these extensions give the Titan 1000D series lift tables an extra large working space for larger vehicles.
Includes
- Removable Ramps
- Mounting Poles
- Stabilizer Bar
Auxiliary jack stands are recommended to add safety to your 2-post automotive lift. Using an auxiliary jack stand under both the front and back ends of a vehicle will dramatically help to stabilize the vehicle and give you peace of mind. This 4,000 lb capacity jack stand has been designed to precise specifications to provide years of safe and reliable service.
Specs
Capacity 4,000 lb
Minimum Height 47.25"
Maximum Height 84"
Base Width 24"
10L Tank - With 3-Prong Plug
This 110V power unit is compatible with the following lifts:
- MRL-6000
- SDPL-7000
- SDPL-7000XLT
- SDPL-8000
- SDPL-8000XLT
This roller drop out is designed to fit into the drop out section of the Titan 1500XLT series lift tables. These rollers are designed to help rotate the tire to do chain work or for cleaning purposes. Do NOT operate a motorcycle on the roller dropout. It is not to be used as a dyno device. The 1500XLT roller drop out comes in two choices of powder coated colors.
This 90° bracket can be used to change the mounting point of the power unit on the column from the side of the lift to the rear of the lift. This bracket works with the SDPL series 4-post models ONLY.
The Titan POD-8 makes draining oil so much easier while your vehicle is on your Titan 2-Post or 4-Post lift.
Features
- Easy Height Adjustment
- Built-In Easy Pour Handle
- Translucent Jug for Easy Level Viewing
- 4 Oil Resistant PVC Casters for Easy Mobility
Specs
| Capacity | 8 Gallons |
|---|---|
| Max Height | 65" |
| Min Height | 27.5" |
| Funnel Diameter | 16.5" |
| Pipe Diameter | 2" |
| Tank Diameter | 18" |
| Tank Height | 21" |
A durable floor jack is an essential tool for your shop or home garage. The Titan FJ3T, 3-ton floor jack is designed and built for safely lifting your vehicle.
With its quick pump ability, you’ll have your vehicle up to your desired working height with minimal effort.
Backed by a 1-year parts warranty, this floor jack is a nice addition for your shop or home garage.
Specs
| Rated Capacity | 6,000 lb |
|---|---|
| Min. Height | 3" |
| Max. Height | 19-1/2" |
| Length | 27" |
| Net Weight | 70 lb |
The padded frame engaging adapter will allow you to lift trucks and other vehicles with harder to access frame lifting points.
*Only for 2nd generation 12000F & 15000C models.*
SOLD INDIVIDUALLY
Specs:
Adapter contact area: 3-5/8”
Rubber pad: 3-1/8” square
Peg diameter: 2-1/8”
Height adjustability 2-1/4”
This Titan heavy duty vise is lined with a screw-on rubber padding to keep rims from being damaged. With a powder coat finish in four different colors, this vise is perfect for any motorcycle lift table.
INCLUDES
Screw-On Rubber Lining
Mounting Hardware
Replace your standard length arms with these extra long arms, which will work with your existing lift and adapter pads. The long arms provide 8" in extra length to reach those wider framed vehicles, making it easier than ever to lift them up for some quick detailing or maintenance.
(SOLD IN PAIRS)
The Titan 6,000 lb. capacity rolling bridge jack can be added to the HD4P-12000 4-post parking lift* to assist in lifting the front or back of a vehicle off the runways for wheel and suspension work.
This scissor style hydraulic jack comes complete with rubber pads, stackable height adapters, and telescoping arms that allow the jack to slide between the two runways.
*This bridge jack will not work on the SDPL-7000, SDPL-7000XLT or SDPL-8000XLT model 4-post lifts.
Shipping Info
| Shipping Length | 41" |
|---|---|
| Shipping Width | 23" |
| Shipping Height | 16" |
| Shipping Weight | 385 lb |
These sturdy steel jack trays are used for support of portable jacks to lift the frame of an automobile on the lift. The trays are easily slid from front to back to place anywhere desired under the vehicle. Designed for use with SDPL-8000XLT, SDPL-7000 & SDPL-7000XLT 4-post models only.
- Max Capacity: 3,500 lb
This one-step caster kit is easy to install with no tools. Simply pin them on, lower lift, casters automatically lift the columns; turn lift sideways to park two vehicles underneath.
These sturdy steel jack trays are used for support of portable jacks to lift the frame of an automobile on the lift. The trays are easily slid from front to back to place anywhere desired under the vehicle. Designed for use with SDPL-8000 4-post model only.
Max Capacity: 3,500 lb
The longer center ramp will allow for lower profile bikes to easily roll on to the SDML series motorcycle/ATV lifts.
Dimensions: 41” x 16”
Many have asked for it, so we listened. Our new Titan TJ1T two-stage transmission jack was literally designed to work hand-in-hand with our wide range of automotive lifts. Easy to maneuver, strong, stable and ready to make your job easier. A great addition to any shop or garage.
Specs
| Rated Capacity | 2,200 lb |
|---|---|
| Stroke | |
| -- 1st Stage | 19-1/4" |
| -- 2nd Stage | 20" |
| Min. Height | 37" |
| Max. Height | 76-1/4" |
| Net Weight | 148 lb |
This adapter fits the following models: HD2P-11000ACX HD2P-9000AC (Gen 2) HD2P-9000AF (Gen 2)
The padded frame engaging adapter will allow you to lift trucks and other vehicles with harder to access frame lifting points.
SOLD INDIVIDUALLY
Specs:
Adapter contact area: 3-5/8”
Rubber pad: 3-1/8” square
Peg diameter: 1-3/4”
Height adjustability 2-1/4”
The black tool tray is made to fit on both the HDML-1500XLT & HDML-1500XLT-E model motorcycle/ATV lifts that have pre-cut slots in the side of the lift. With 4 placement options around the lift, this tool tray provides a convenient spot for your tools while you work on your project. Made of 12-gauge steel and powder coated black finish, you'll never want to work without it again!
These deluxe ratchet straps have everything you need to help you tow your motorcycle. Equipped with plastic coated hardware, hooks with automatic clips to keep the hooks fastened and soft ties to put around the bike itself, this heavy-duty pair of straps will make sure that your bike isn't going anywhere while you are towing it.
Auxiliary jack stands are recommended to add safety to your 2-post automotive lift. Using an auxiliary jack stand under both the front and back ends of a vehicle will dramatically help to stabilize the vehicle and give you peace of mind. This 1,500 lb capacity jack stand has been designed to precise specifications to provide years of safe and reliable service.
Specs
| Capacity | 1,500 lb |
|---|---|
| Minimum Height | 53.5" |
| Maximum Height | 80" |
| Max Height w/Pedal Depressed | 81" |
| Base Diameter | 12" |
| Folding Pedal Length | 18" |
The Titan 3,500 lb. capacity sliding bridge jacks can be added to either of the 7,000 lb. capacity Titan parking lifts to assist in lifting the front or back of a vehicle off the runways for wheel and suspension work. This scissor style hydraulic jack comes complete with rubber pads, stackable height adapters, and telescoping arms that allow the jack to slide between the two runways.
Height Adapters
- Short - 1.25"
- Long - 5"
- Stacked - 6.25"
Dimensions
| Lowered Height | 2-5/8" |
|---|---|
| Maximum Lifting Height | 15-1/2" |
| Minimum Pad Width | 35-1/4" (out to out) |
| Maximum Pad Width | 65" (out to out) |
| Sliding Base Minimum Width | 32-3/4" (out to out) |
| Sliding Base Maximum Width | 55-1/2" (out to out) |
Shipping Info
| Shipping Length | 38" |
|---|---|
| Shipping Width | 23" |
| Shipping Height | 15" |
| Shipping Weight | 350 lb |
These drip trays are made of lightweight polyethylene and are simple to slide to the back and stack! Designed for use with the SDPL-8000 4-post model only.
Dimensions: 37” x 24” x 2”
These drip trays are made of lightweight polyethylene and are simple to slide to the back and stack! Designed for use with the SDPL-8000XLT 4-post model only.
Dimensions: 43” x 24” x 2”
12L Tank - No cut-off switch
This 220V power unit is compatible with the following lifts:
- HD2P-12000F
- HD2P-15000C
10L Tank - No Cut-off Switch
This 220V power unit is compatible with the following lifts:
- HD2P-9000AC
- HD2P-9000AF
- HD2P-10000AC-D
- HD2P-11000ACX
- HD4P-12000